|
| |
Grain-Oriented Electrical Steel Fully Processed
MAGNETIC PROPERTIES
ASTM
Grade |
AISI
Grade |
Gauge
|
Core Loss PC [W/Lb] Parallel grain samples, stress relief anneal after
shearing |
[in] |
[mm] |
60Hz |
50Hz |
15KG |
17KG |
15KG |
17KG |
Typical |
Maximum |
Typical |
Maximum |
Maximum |
Maximum |
23G045 |
29 M3 |
0.009 |
0.23 |
0.40 |
0.45 |
0.60 |
0.70 |
0.34 |
0.53 |
27G051 |
29 M4 |
0.011 |
0.27 |
0.46 |
0.51 |
0.68 |
0.74 |
0.39 |
0.56 |
30G058 |
29
M5 |
0.012 |
0.30 |
0.52 |
0.58 |
0.75 |
0.83 |
0.44 |
0.63 |
35G066 |
29
M6 |
0.014 |
0.35 |
0.60 |
0.66 |
0.82 |
0.94 |
0.50 |
0.71 |
Typical MECHANICAL PROPERTIES in the rolling direction
Type |
Density
[g/cc] |
Tensile Strength
[psi] |
Yield Strength
[psi] |
Elongation
[% in 2 inches] |
Rockwell
Hardness |
ALL |
7.65 |
50,000 |
47,000 |
10 |
85 |
Typical INSULATIVE CHARACTERISTICS as sheared
Condition |
Surface Type
ASTM A-345 |
Surface Insulation Effectiveness
ASTM A-717 |
Stack Resistance or Interlaminar Resistivity
ASTM A-718 |
NF Annealed |
C-2 |
0.70 A and less |
0.40 ohm mm2 / Lamination and higher |
F2
Thermally Flattened |
C-2 |
0.70 A and less |
0.40 ohm mm2 / Lamination and higher |
F5
Thermally Flattened |
C-5 / C-2 |
0.30 A and less |
1.00 ohm mm2 / Lamination and higher |
PQ
Thermally Flattened |
C-5 |
0.85 A and less
|
0.02 ohm mm2 / Lamination and higher |
|
